| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Certification: | ISO9001, CE |
|
Still deciding? Get samples of US$ 4000/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Electric Cattle Hoof Trimming / Cattle equipment / Cattle Hoof Trimming / Cattle Crush
Description:
Size: 2550mmL*1150mmW*2000mmH
Finish: : Hot-dipped galvanized
Material: Rail : 40mmO.D.*1.6mmT/42mmO.D.*1.6mmT
Square tube: 50x50x2mmT
Packing: In pallet or as customer requirement
| Size | 2550mmL*1150mmW*2000mmH |
| Material | Hot-dip galvanized steel tube |
| Frame | 48mm O.D.*1.6mmT 60mmO.D.*1.6mmT |
| Rail: | 40mmO.D.*1.6mmT 42mmO.D*1.6mmT |
| Height | 2m, 2.05m,2.15m and so on |
| Weidth | 1.2m, 1.3m, 1.5m and so on |
| Welded | Fully welded post brackets |
| Other size as customer requirement | |
Design:
- Electric Cattle Hoof Trimming has a rear entrance gate closed by a horizontal rump bar and unique quick adjust, self-closing front gate.
-easy adjustment of the animal's neck in between dual yokes.
- middle braces for high strength and heavy duty
- with welded top caps and foot plates, water and dust proof
Fatures of Electric Cattle Hoof Trimming:
*All parts of our crushes are hot dipped galvanized for maximum corrosion
*Anti - backing ratchets;
*Heavy duty and easy to install;
*Cattle Rail side rails and steel sheeted bottom gates;
*Small side door can lock in place when open;
Cattle crush 1 is especially designed for cows with long horns as it possesses a front gate consisting of dual yokes
with a chain, which open sideways, between which cow's head is blocked. It has a heavy duty main frame and antislippery steel tread plate floor. All parts of our crush are hot dipped galvanized for maximum corrosion resistance and
long life durability. The cattle crush is designed to allow complete and safe access to the animal's flanks for all tasks,
leaving the animal immobile at the same time. It possesses foot trimming equipment including adjustable double belly
support straps, a worm gear by means of which a cow is lifted from the ground and front and back winches. These
winches possess German made ratchet cranks which enable stable, rigid and safe hoof trimming positions. Standard
cattle crush KPB 1 has one front winch, which can be unscrewed to move it to other side or it can be equipped with two
adjustable and moveable to the sides front winches at extra cost. The back gate is equipped with a specially designed
dung plate to assist in a clean work environment. Our crush can be easily moved using a back tractor linkage or pallet
forks from the side. It can also be easily transportable manually thanks to a set of wheels, an axis and a drawbar, which
can be purchased at extra cost
| Height | 200 cm |
| Width | 115 cm |
| Length | 255 cm |
| WEIGHT | 290 kg |
Cattle crush 2 is especially designed for cows with long horns as it possesses a front gate consisting of dual yokes
with a chain, which open sideways, between which cow's head is blocked. It has a heavy duty main frame and antislippery steel tread plate floor. All parts of our crush are hot dipped galvanized for maximum corrosion resistance and
long life durability. The cattle crush is designed to allow complete and safe access to the animal's flanks for all tasks,
leaving the animal immobile at the same time. It possesses foot trimming equipment including adjustable double belly and
inguinal support straps (especially destined for calving cows and cows with large milk veins), a worm gear by means of
which cow is lifted from the ground and front and back winches. These winches possess German made ratchet cranks
which enable stable, rigid and safe hoof trimming positions. Standard cattle crush KPB 1P has one front winch, which can
be unscrewed to move it to other side or it can be equipped with two front winches at extra cost. The back gate is
equipped with a specially designed dung plate to assist in a clean work environment. Our crush can be easily moved
using back tractor linkage or pallet forks from the side. It can also be easily transportable manually thanks to a set of
wheels, an axis and a drawbar, which can be purchased at extra cost.
| height | 200 cm |
| width | 115 cm |
| length | 255 cm |
| WEIGHT | 315 kg |
Cattle crush 3 is specially designed for beef cows with long horns as it possesses a front gate consisting of dual
yokes with a chain, which open sideways, between which cow's head is blocked. It is a crush, which is mainly designed
for carrying out various veterinary procedures. Its sides are additionally protected by welded wire mesh. All parts of our
crush are hot dipped galvanized for maximum corrosion resistance and long life durability. The cattle crush is designed to
allow complete and safe access to the animal's flanks for all tasks, leaving the animal immobile at the same time. The
crush possesses adjustable double belly support straps, a worm gear by means of which cow is lifted from the ground.
The crush KPB 1M is so designed that it can also function as a hoof trimming device, as it can have front leg
winches(either one or two) fixed at extra cost. The back gate can also be changed into the one which allows hoof
trimming procedures (extra cost). The back gate has a dung plate to assist in a clean work environment. Our crush can be
easily moved using back tractor linkage or pallet forks from the side. It can also be easily transportable manually thanks
to a set of wheels, an axis and a drawbar, which can be purchased at extra cost.
| height | 200 cm |
| width | 115 cm |
| Length | 220 cm |
| WEIGHT | 305 kg |
The electric Cattle crush 4 is specially designed for bulls or large cows with long horns as it possesses a front gate consisting
of dual yokes with a chain, which open sideways, between which cow's head is blocked. It has a reinforced heavy duty
main frame and anti-slippery steel tread plate floor. All parts of our crush are hot dipped galvanized for maximum
corrosion resistance and long life durability. The cattle crush is designed to allow complete and safe access to the
animal's flanks for all tasks, leaving the animal immobile at the same time. It possesses foot trimming equipment including
adjustable double belly and inguinal support straps (especially destined for calving cows and cows with large milk veins),
a worm gear by means of which cow is lifted from the ground and front and back winches. These winches possess
German made ratchet cranks which enable stable, rigid and safe hoof trimming positions. Standard cattle crush KPB 1P
has one front winch, which can be unscrewed to move it to other side or it can be equipped with two front winches at
extra cost. The back gate is equipped with a specially designed dung plate to assist in a clean work environment. Our
crush can be easily moved using back tractor linkage or pallet forks from the side. It can also be easily transportable
manually thanks to a set of wheels, an axis and a drawbar, which can be purchased at extra cost.
| Height | 220 cm |
| Width | 125 cm |
| Length | 270 cm |
| WEIGHT | 350 kg |
1. What is your best price for this product ?
The price is negotiable. It can change according to your quantity or package. When you are making an inquiry, please let us know the quantity you want.
2. What is your packing based on the price you quoted?
The price we quoted is based on and export carton that we normally use.
3. Can we mark our own logo on product ?
Yes, we can make the logo for you. But according the item, some good moq maybe is high, If you have to print or mark any logo,please let us know so we can figure out the cost for you
4. What about the warranty?
We are very confident in our products, and we pack them very well, so usually you will receive your order in good condition.
){kind=link}